Infocus sp5000 参照ガイド

To adjust the following six settings, highlight the setting, press Select, use 
the up and down arrows to adjust the values, then press select to confirm 
the changes.

: adjusts the image vertically and makes a squarer image. 

You can also adjust vertical keystone from the keypad. If you want the pro-
jector to automatically adjust the vertical keystone, check the Auto Vertical 
check box.

: adjusts the image horizontally and makes a squarer 

image. 

: controls the degree of difference between the lightest and darkest 

parts of the picture and changes the amount of black and white in the 
image.

: changes the intensity of the image.

: (video and component sources only) adjusts a video image from 

black and white to fully saturated color.

: (NTSC video sources only) adjusts the red-green color balance in the 

image.

: Aspect ratio is the ratio of the image width to image height. 

TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are 
1.78:1, or 16:9. The default is16:9.

: this mode bypasses the internal scaler, displaying the image with no 

resizing. Since the native resolution is 1280x720 and 4x3 video images are 
approximately 640x480, 4x3 images will always be smaller than the display 
and will be centered in the display. Computer images 1024x768 or smaller 
will also be centered in the display. If a 16x9 video source or a 1280x1024 or 
larger computer source is viewed, it will display up to 1280 pixels and 720 
lines from the center of the input.

increasing keystone

decreasing keystone

Vertical Keystone

Horizontal Keystone

Aspect Ratio