Infocus X6 参照ガイド

English ...

Warning: To avoid

burns, allow the projec-

tor to cool for at least

60 minutes before you

replace the lamp!

Warning: To reduce the

risk of personal injury,

do not drop the lamp

module or touch the

lamp bulb. The bulb

may shatter and cause

injury if it is dropped.

1.   Switch off the power to the projector by pressing the Power/

Standby .

2.  Allow the projector to cool down at least 60 minutes.

3.  Disconnect the power cord.

4.  Use a screwdriver to remove the screw from the cover. 

5.  Push up and remove the cover.

6.   Remove the 2 screws from the lamp module  and pull up

the lamp bar. 

7.  Pull out the lamp module by force. 

1

3

4

2