ICOM ic-91a 取り扱いマニュアル
35
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
7
y Push [≈
≈](6) to select 2nd digit, then rotate [DIAL]
†
to se-
lect the desired character or code.
• Push [
≈
≈](6) to move the cursor right; push [Ω
Ω](4) to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u Repeat the steps t and y to enter your own call sign.
• Up to a 8-digit of call sign can be set.
• If an un-necessary character is entered, push [
• If an un-necessary character is entered, push [
≈
≈](6) or [Ω
Ω](4) to
select the character, then push [CLR](1) to erase the selected
character, or push and hold [CLR](1) for 1 sec. to erase all char-
acters following the cursor.
character, or push and hold [CLR](1) for 1 sec. to erase all char-
acters following the cursor.
• When programming a note (Up to a 4-digit for operating radio
type or area, etc.), go to step i, otherwise go to step !0.
i Push [≈
≈](6) several times to set the cursor beside “/” indi-
cation.
o Repeat steps t to y to program the desired 4-character
note.
!0 Push [ï](5) to store the programmed call sign with note
and returns to MY CALL SIGN screen.
!1 Push [MENU/LOCK] to return to frequency indication.
M01
M01
MYCALL
MYCALL
MYCALL
/IC91
/IC91
/IC91
:SET
:BACK
:BACK
:SEL
:EDIT
:EDIT
CLR:CLR
MY CALL SIGN
r
M01
M01
M†
M†
/
MY CALL SIGN
r
:SET
:SET
:SEL
:SEL
:SEL
:CUR
:CUR
CLR:CLR
CLR:CLR
A/a:CHAR
A/a:CHAR
A/a:CHAR
AB
†
[DIAL]
↔ [∫
∫](2)/[√
√](8)
[ï](5)
↔ [≈
≈](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19