ICOM ic-91a 取り扱いマニュアル
42
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
D
D Repeater operation in the same zone
q Set the desired repeater’s frequency, offset and shift direc-
tion in B band.
(pgs. 18, 31)
• Select DV mode in advance. (p. 21)
w Set your own call sign.
(p. 38)
• See p. 34 for your own call sign programming.
e Set the desired station call sign.
(p. 39)
• See p. 36 for station call sign programming.
r Set the repeater’s call sign as follows;
z Enter “R1” in call sign set mode.
xRotate [DIAL]
†
to select the nearest repeater’s call sign.
cPush [ï](5) to set the call sign for “R1.”
• Return to CALL SIGN screen.
vRotate [DIAL]
†
to select “R2” then push [ï](5)
†
.
• RPT2 CALL SIGN screen is displayed.
bRotate [DIAL]
†
to select the desired repeater’s
(in the
same zone)
call sign.
• Select “NOT USE
✱” when not operating RPT2.
nPush [ï](5) to set the call sign for “R2.”
• Return to CALL SIGN screen.
mPush [MENU/LOCK] to return to frequency indication.
t Push [PTT] to transmit; release to receive.
UR:CQCQCQ
UR:CQCQCQ
R1:RPT1AA
R1:RPT1AA
R1:RPT1AA
R2:NOT USE*
R2:NOT USE*
R2:NOT USE*
MY:MYCALL
MY:MYCALL
MY:MYCALL
/IC91
/IC91
/IC91
CALL SIGN
r
MENU screen
➪
CALL SIGN
➪
R1
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [ï](5)
†
.)
†
[DIAL]
↔ [∫
∫](2)/[√
√](8)
[ï](5)
↔ [≈
≈](6)