ICOM ic-91a 取り扱いマニュアル
77
9
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Memory scan
IMPORTANT!: To perform memory scan, 2 or more mem-
ory channels MUST be programmed, otherwise the scan
will not start.
ory channels MUST be programmed, otherwise the scan
will not start.
q Push [MR] to select memory mode.
w Set the squelch level.
e While pushing and holding [SCAN](2), rotate [DIAL] to se-
w Set the squelch level.
e While pushing and holding [SCAN](2), rotate [DIAL] to se-
lect the desired scanning type.
• “ALL” for full memory scan; “BAND” for band memory scan,
“MODE” for mode scan, “DUP” (appears only when duplex oper-
ation is set) for duplex scan.
ation is set) for duplex scan.
r Release [SCAN](2) to start the selected scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction, or resumes
• Rotate [DIAL] to change the scanning direction, or resumes
manually.
t To stop the scan, push [VFO].
Band memory scan function: Repeatedly scans all
memory channels programmed with any frequencies of the
band programmed in the memory channel selected for
scanning.
memory channels programmed with any frequencies of the
band programmed in the memory channel selected for
scanning.
Mode scan function: Repeatedly scans all memory chan-
nels in which the same operating mode as the selected
memory channel has been programmed.
nels in which the same operating mode as the selected
memory channel has been programmed.
Duplex scan function: Repeatedly scans two frequencies
(transmission/reception) during duplex scan operation.
(transmission/reception) during duplex scan operation.
FM
A
µ
012
148 800
• During memory scan
FM
FM
A
146 010
µ
088
088
SCAN:ALL
FM
A
148 800
µ
088
088
SCAN:BAND
FM
A
148 800
µ
088
088
SCAN:MODE
P SKIP
SKIP
P SKIP
SKIP
P SKIP
SKIP
• All memory scan selection
• Mode scan selection
• Band memory scan selection
[DIAL]