ICOM ic-f1020 取り扱いマニュアル

■

The following functions can be assigned to programmable
function keys.  Assigned function names can be affixed to the
LCD using supplied stickers.

• Select an operating channel
• Select a bank after pushing the [

] key.

• Select a DTMF channel after pushing the [

]

key.

• Select a scan group after pushing and holding the

[

] key.

Select a bank (a group of 16 (or multiples of) chan-
nels).

• This function may be available for the optional 160 chan-

nel type only.

• When the optional UT-105 is installed, push one or more

times to select a channel bank for conventional channels
or SmarTrunk II™ channels.

1

PANEL DESCRIPTION

2

VOLUME CONTROL
Adjusts the audio output level.
• Minimum audio level (when setting control at maximum

counterclockwise) is pre-programmed.

POWER SWITCH
Turns the power ON and OFF.
• The following functions are available at power ON as op-

tions:

• Automatic scan start
• Password prompt

MICROPHONE CONNECTOR
Connects the supplied microphone or optional DTMF micro-
phone for SmarTrunk II™ operation here.
NEVER connect other microphones.  The pin assignments
may be different and the transceiver may be damaged.

MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.  
• The following functions are available when the microphone is

hung on or released form the microphone hanger:

• Automatic scan start when hung.
• Automatic priority channel selection when released.
• Turns OFF and ON the monitor function when hung or released

respectively.