ICOM ic-f1020 取り扱いマニュアル

4

13

■

This transceiver meets to SmarTrunk II™ functions.

The optional UT-105 allows communication in conventional
channels or SmarTrunk II™ channels. Select a channel bank
for SmarTrunk II™ before trunking operation.

• Push [

] or [

] one or more times to select a chan-

nel bank for conventional channels or SmarTrunk II™ chan-
nels.

• Pushing [

] or [

] while pushing [

] can also select

the channel bank.

• Scanning starts when a channel bank for SmarTrunk II™ is se-

lected.

• Contact your dealer for channel bank details.

NOTE: Connect an optional DTMF microphone. Contact
your dealer for details.

■

These features are enabled by a dealer or system operator
and may not be available in your system. Contact your dealer
for details.

D

Enter the phone number followed by [1], [

M

].

• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to talk, and

release it to listen.

D

Enter the subscriber number followed by [3], [

M

].

• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber an-

swers.

• If the other subscriber is on another call or out of range, you hear a

fast busy signal and the call terminates automatically.

D

When you hear ringing, push [

M

] to answer.

• For a group call, you hear a short ring followed by two short beeps.

You do not have to answer a group call to hear it over the air.