ICOM ic-f1020 取り扱いマニュアル

i

R

connect the transceiver to an

AC outlet. This may pose a fire hazard or result in an electric
shock.

connect the transceiver to a power source of more

than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.

cut the DC power cable between the DC plug and

fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.

place the transceiver where normal operation of

the vehicle may be hindered or where it could cause bodily
injury.

allow children to touch the transceiver.

expose the transceiver to rain, snow or any liquids.

connect the transceiver to a power source using

reverse polarity. This connection will not only blow fuses but
also may damage the transceiver.

supplied microphone only. Other microphones have

different pin assignments and may damage the transceiver.

CAUTIONS

IMPORTANT

carefully and com-

pletely before using the transceiver.

This

instruction manual contains important operating instructions
for the IC-F1020 and IC-F2020 LMR TRANSCEIVERS.

EXPLICIT DEFINITIONS

The following explicit definitions apply to this manual.

R

Personal injury, fire hazard or electric shock
may occur.

Equipment damage may occur.

If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.

SmarTrunk II™ is a Trademark of SmarTrunk Systems, Inc.