ICOM IC-U82 取り扱いマニュアル

38

10

■

This function uses DTMF codes for paging and can be used
as a “message pager” to confirm you of a caller’s identification
even when you leave the transceiver temporarily unattended.

■

D

D

The pager and code squelch functions require ID codes and a
group code. These codes are 3-digit DTMF codes and must
be written into the code channels before operation.

q Decide the ID code of each transceiver and a group code

for your group.

w Decide whether you want to return to normal operation or

code squelch operation after a connection is made.

e Program the ID code, group code and transmit codes

(other station’s codes) as below.

D

D

*Channel CP automatically memorizes an ID code when receiving a

pager call. The contents in channel CP cannot be changed manually.

Pager selective code (push [PTT])

Beep  Beep

Beep  

Answer back (manual)

Beep  Beep

Beep  

Set both transceivers to either

code squelch or non-coded operation

Communication

Your ID code

Other parties’

ID code

Group code

Memory space*

0

1–6

One of 1–6

P

“Receive accept” only

“Receive inhibit” should be 

programmed in each channel.

“Receive accept” must be 

programmed in one channel.

“Receive inhibit” only.