ICOM IC-V8000 取り扱いマニュアル
4
1
PANEL DESCRIPTION
1
yS/RF INDICATORS
➥ Shows the relative signal strength while receiving sig-
nals. (p. 13)
➥ Shows the output power level while transmitting. (p. 15)
uSKIP INDICATOR (p. 41)
Appears when the displayed memory channel is specified
as a skip channel.
as a skip channel.
iMEMORY INDICATOR (p. 24)
Appears when memory mode is selected.
oMEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number. (p. 24)
➥ “C” appears when the call channel is selected. (p. 35)
!0PRIORITY WATCH INDICATOR (p. 44)
Appears while the priority watch is activated; blinks while
the watch is paused.
the watch is paused.
!1LOCK INDICATOR (p. 12)
Appears when the lock function is activated.
!2TONE INDICATORS
➥ “ ” appears while the subaudible tone encoder is in
use. (p. 17)
➥ “ ” appears while the tone
(CTCSS)
squelch function is
in use. (p. 48)
➥ “ ” appears while the tone
(DTCS)
squelch function is
in use. (p. 48)
➥ “ ” appears with the “ ” or “ ” indicator while the
pocket beep function
(CTCSS or DTCS)
is in use. (p. 48)
!3DUPLEX INDICATORS (p. 17)
“+” appears when plus duplex, “–” appears when minus
duplex operation is selected.
duplex operation is selected.
!4AUTO POWER-OFF INDICATOR (p. 64)
Appears while the auto power-off function is in use.
!5NARROW MODE INDICATOR (p. 61)
Appears when the narrow mode is selected.
Narrow mode is available with some USA versions only.
Narrow mode is available with some USA versions only.