ICOM id-800h 取り扱いマニュアル

11

2

■

D

➥ Push and hold 

for 1 sec. to turn power ON and OFF.

D

The ID-800H has 2 m and 70 cm bands for transmission and
reception. In addition, extra frequency bands 127, 220, 350,
500 and 900 MHz bands are available for wide-band receiver
capability (except Taiwan and Korean version).

➥ Push 

and rotate 

, then push

to select the desired frequency band.

➥ Push 

and 

Y

Y

Z

Z

, then push 

to select the desired band.

D

The transceiver has 2 basic operating modes: VFO mode and
memory mode. Select VFO mode first to set an operating fre-
quency.

➥ Push 

to select VFO mode.

• When VFO mode is already selected, the digit below 10 MHz

(the digit below 1 MHz or 100 kHz disappear depending on ver-
sions) disappear. In this case, push 

again (or

twice or 3 times depending on version).

➥ Push 

to select memory mode.

• “!” indicator appears when memory mode is selected.

➥ Push 

to select VFO mode.

➥ Push 

to select memory mode.

VFO/LOCK

[V/MHz•SCAN]

[M/CALL•PRIO]

Appears

BAND

[BAND•MODE]

[PWR]

Note that in this manual, sections beginning with a micro-
phone icon (as above), designate operation via the HM-133
microphone.