ICOM id-800h 取り扱いマニュアル

■

The transceiver has 3 output power levels to suit your oper-
ating requirements. Low output powers during short-distance
communications may reduce the possibility of interference to
other stations and will reduce current consumption.
➥ Push 

once or twice to select the output power.

*approx 

• The output power can be changed while transmitting.

The microphone can also be used to select output power.

➥ Push 

for high output power;

S

S

for middle output power; and

for low output power.

• The output power can be changed via the microphone

during receive only.

■

The PTT switch can be operated as a one-touch PTT switch
(each push toggles between transmit/receive). Using this
function you can transmit without pushing and holding the
PTT switch.

To prevent accidental, continuous transmission with this func-
tion, the transceiver has a time-out timer. See p. 94 for de-
tails.

z Push 

then 

to turn the

one-touch PTT function ON.

• The activity indicator lights green.

x Push 

to transmit and push again to re-

ceive.

• A beep sounds when transmission is started and a

long beep sounds when returning to receive.

• “$” blinks when transmitting with the one-touch

PTT function.

c Push 

then 

to turn the

one-touch PTT function OFF.

• The activity indicator goes out.

indicator blinks

PTT-M

HIGH

4

MID

5

LOW

6

19

3

BASIC OPERATION

VHF

UHF

55 W

50 W

15 W*

15 W*

5 W*

5 W*

High:

Mid:

Low: