ICOM id-800h 取り扱いマニュアル

53

9

DTMF MEMORY ENCODER

■

D

q Push 

for 1 sec. to turn the DTMF memory

encoder ON.

• “d” appears in place of 100 MHz digit.

w Push 

to enter DTMF memory programming

condition.

e Rotate 

to select the desired DTMF memory chan-

nel.

r Push 

to transmit the selected DTMF memory content.

t Push 

for 1 sec. to cancel the DTMF en-

coder.

• When the DTMF encoder is turned ON continuously, each push

of the PTT transmits the previously selected DTMF code.

z Push 

then 

to turn the

DTMF memory encoder ON.

• “d” appears in place of 100 MHz digit.

x Push 

to enter the DTMF mem-

ory programming condition.

c Push 

Y

Y

or 

Z

Z

to select the desired channel.

v Push 

to transmit the selected memory.

• Exit the programming condition automatically.
• Each push of 

transmits the DTMF code.

b Push 

then 

to cancel the

DTMF memory encoder.

• When the DTMF encoder is turned ON continuously,

each push of the PTT transmits the previously se-
lected DTMF code.

D

z Push 

then 

to turn the

DTMF memory encoder ON.

• “d” appears in place of 100 MHz digit.

x Push 

to turn the DTMF memory di-

rect selection ON.

• The function indicator (microphone) lights green.

c Push the desired DTMF channel.

• “0” to “9” and “A” to “D” are available for DTMF

memory channels.

• The selected DTMF code is automatically transmit-

ted without pushing PTT.

When no DTMF code programmed

channel number is pushed, it transmits the rela-
tive DTMF code as the manual transmission de-
scribed in the next page.

v Push 

again to deactivate the DTMF

memory direct selection.

b Push 

then 

to cancel

the DTMF memory encoder.

DTMF-S

DTMF