ICOM id-rp2 取り扱いマニュアル

PANEL DESCRIPTIONS

■ ID-RP2L

q POWER CABLE CONNECTOR [DC13.8V] (p. 11)

Connects to ID-RP2C to be supplied the DC power.
Cable length: Approx. 30 m; 100 ft

w ANTENNA CONNECTOR [ANT] (p. 11)

Connects an optional parabolic antenna AH-106 or
AH-107.

e STATUS INDICATOR [STATUS]

Indicates the following unit conditions.

• Light

: The power is ON and function-

ing correctly.

• Flashing slowly: Unlock PLL

(Reboot the ID-RP2L.

If the indicator still flashing even
after rebooting, contact authorized
Icom dealer or distributor.)

• Flashing fast

: Setting data malfunction.

(Data initializing and re-setting are

required using with the ID-RP2L
utility software.)

• Light off

: The power is OFF.

r TEST PLUG [TEST] (p. 18)

Connects the supplied test plug* when adjusting the
parabolic antenna beam.
Test mode is automatically selected when connect-
ing the test plug.

IMPORTANT!: Attach the waterproof cap during

normal operation.

*See p. 18 for test plug assembling and connections de-

tails.

t DATA CABLE CONNECTOR B [DATA B] (p. 11)

Connects to the ID-RP2C for transmit/receive sig-
nal data and control signal communications.
Cable length: Approx. 30 m; 100 ft

y DATA CABLE CONNECTOR A [DATA A] (p. 11)

Connects to the ID-RP2C for transmit/receive sig-
nal data and control signal communications.
Cable length: Approx. 30 m; 100 ft

q RSSI output

w TEST

e GND

r GND

Front view

t
y