ICOM rs-rp2c ソフトウェアガイド

11

2

SYSTEM SETUP

D

D Local IP address reservation

q Enter the following command in the Terminal-2.

#echo “reserve”>/tmp/dsipsvd-cmdin

• The command processing result outputs to Terminal-1.

w The reserved IP addresses are displayed when the

“reserve” command operation is succeeded.

• 32 of local IP addresses are reserved in consecutive

numbers.

Reserved IP addresses

Command

D

D Station registration

➥ Enter the following command in the Terminal-2.

#echo“add ID1000|RPT000|RPT000|

XXX.XXX.XXX.XXX|10.22.179.96|id1000”

> /tmp/dsipsvd-cmdin

*XXX.XXX.XXX.XXX=global IP address

Format:
add

Y

Y

[CS(T)]|[CS(A)]|[CS(Z)]|[GWIP]|[TIP]|

[HNAME]

• Local IP addresses must be reserved using with “re-

serve” command in advance.

• The command processing result outputs to Terminal-1.

<The station registration confirmation>
➥ Enter the following command in the Terminal-2.

#dig id1000.dstar.local

• The registration is succeeded when the registered local

IP address is displayed in answer section.

Command

Confirmed staion
IP address

Command (example only)

D

D Station data synchronization

➥ Enter the following command in the Terminal-2.

#echo “push_mng”> /tmp/dsipsvd-cmdin

• The registered station information will be registered to

another gateway’s IP server when this command is per-
formed.

D

D Data output

➥ Enter the following command in the Terminal-2.

#echo “write MNG /tmp/mng.txt”>

/tmp/dsipsvd-cmdin
Format: 
write

Y

Y

[DB]

Y

Y

[FNAME]

• The functioning data in the memory is output into the

specified file.