Maxent mx-26x3 ユーザーズマニュアル
19
Display Connections
Connecting a Subwoofer
This monitor is equipped with a subwoofer output for connecting to an external amplified subwoofer.
Connecting a PC
Using RGB or DVI Video Input
Connect a RCA cable from the subwoofer’s
input to the subwoofer’s output jack on the
back of the monitor.
input to the subwoofer’s output jack on the
back of the monitor.
Notes:
The RCA subwoofer outputs frequencies
below 120Hz.
below 120Hz.
The subwoofer output jack is governed by
FIXED or VARIABLE audio output setting
and works in conjunction with AUDIO OUT
jacks.
FIXED or VARIABLE audio output setting
and works in conjunction with AUDIO OUT
jacks.
Connect the red (R) and white (L) audio jacks
from the PC to the R and L jacks located next
to the RGB connector. If you are using a DVI
interface, simply connect the (R) and (L) audio
jacks to the R and L jacks located next to the
DVI connector.
from the PC to the R and L jacks located next
to the RGB connector. If you are using a DVI
interface, simply connect the (R) and (L) audio
jacks to the R and L jacks located next to the
DVI connector.
For most PCs, connect the 15-pin D-Sub RGB
connector from the back of the PC to the RGB-
IN Connector located on the back of the
monitor. If you have a PC that is equipped with
a DVI (Digital Visual Interface), you may
connect the PC DVI connector from the back of
the PC to the DVI-IN Connector located on the
back of the monitor.
connector from the back of the PC to the RGB-
IN Connector located on the back of the
monitor. If you have a PC that is equipped with
a DVI (Digital Visual Interface), you may
connect the PC DVI connector from the back of
the PC to the DVI-IN Connector located on the
back of the monitor.
Note:
A RGB loop-out labeled RGB Out will allow
another RGB monitor to be connected. The RGB
loop-out will display the same signal as the RGB
In signal source.
another RGB monitor to be connected. The RGB
loop-out will display the same signal as the RGB
In signal source.