Maxent mx-26x3 ユーザーズマニュアル

26

Make sure the monitor is plugged into the wall outlet and the main AC switch located on the rear of the monitor
is switched to ON position.  If the power is plugged in and the AC switch is on, the STATUS LED will illuminate
in orange color.

To turn power off, simply press the 

 key on

the panel or the remote control once again.

Press the 

 key on the panel or the remote

control.

The monitor will now turn on after a brief pause.
The STATUS LED will now turn green to
indicate power on status.

The discrete POWER ON/OFF keys send two discrete signals to the monitor, one for ON and one for OFF.
Because signals are discrete, these keys can be used by third-party universal remote controls for macro
programming.

To turn off power, simply press the 

 button.

If the monitor is already turned off, pressing this
button will have no effect.

To turn power on, simply press the 

  button.

If the monitor is turned on already, pressing this
button will have no effect.

Pressing the INPUT key will cycle the monitor
through all available input signal sources in the
following order:

Press the INPUT key on the panel or the 

key on the remote control.