Maxent mx-26x3 ユーザーズマニュアル

34

Press the 

 on the front panel or remote

control.  Use 

 to select the PICTURE

option from the menu and press   key to

confirm selection.

Explanation of each available picture control settings are listed in the table below.

.

Various picture adjustments can be set using the Picture Adjustment OSD menu.

A small display window appears upon selecting

the option to change.  Use      to change the

setting.  As you change the setting, changes in
the picture are immediately reflected in the
video picture.  After achieving desired setting,
press 

 key to confirm setting and return to

previous menu.

Various picture settings are available from the
PICTURE menu.  Use 

 to select the

option that you wish to adjust and press  key

to confirm selection.

„

H-Position, H-Size, V-Position, V-Size
adjustments are only available in RGB, DVI,
and Component input modes greater than
480i.

„

When using Component 1 and Component
2 inputs with 480i signals, H-Size, H-Position,
V-Position, V-Size settings are not
available.

„

To restore picture settings to factory
default, simply press the RECALL key from
the remote control when the PICTURE
menu is displayed.

CONTRAST
Adjust Contrast to increase or decrease the level of white in the video picture.  Increasing contrast
will make white areas of the video picture brighter.  Contrast works in conjuction with Brightness.