Olympus c-755 ultra zoom ユーザーガイド
5
Connection to a computer
When the USB cable is used to connect the camera to a computer, follow
the procedure below to select PC in the camera settings.
the procedure below to select PC in the camera settings.
1
Insert the marked end of the provided USB cable into the
USB port on your computer as shown below.
USB port on your computer as shown below.
• The location of the USB port varies depending on the computer.
For details, refer to your computer’s manual.
2
Set the camera’s mode dial to
q.
3
Plug the other end of the USB cable
into the camera’s USB connector.
into the camera’s USB connector.
4
Press the power switch to turn the
camera on.
camera on.
5
The selection screen for the USB
connection (shown right) is
displayed on the monitor. Press
ac to select PC and press e.
connection (shown right) is
displayed on the monitor. Press
ac to select PC and press e.
6
The computer recognizes the
camera as a new device.
camera as a new device.
• When you connect the camera to the computer for the first time, the
computer automatically recognizes the camera. Click “OK” when the
message saying that the installation is completed appears.
message saying that the installation is completed appears.
• The computer recognizes the camera as a “Removable Disk”.
Look for this mark.
USB port
Terminal
Note
GO
SELECt
Power switch
Mode dial