Olympus c-1 参照ガイド
46
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Erasing Pictures (One-Frame Erase)
OK/menu button
Arrow pad
1 / 3
SET
OK
SELECT
NO
OFF
NO
NO
Check that the camera is set to the
Playback mode by holding down
the
Playback mode by holding down
the
monitor button for a moment.
You can increase the number of images remaining on a card by erasing
unnecessary images.
unnecessary images.
Operating Procedure
1.
Display the frame to erase by press-
ing the
ing the
or
arrow pad key.
(The frame can also be selected even when
the 4-split or 9-split display is selected.)
the 4-split or 9-split display is selected.)
2.
Press the
OK/menu button.
[
The monitor shows the playback mode
menu 1/3.
menu 1/3.
3.
Select
by pressing the
or
arrow pad key.
4.
Select “YES” by pressing the
or
arrow pad key.
5.
Press the
OK/menu button.
[
The selected image is erased.
The orange lamp on the right of the
viewfinder blinks during erasure.
viewfinder blinks during erasure.
To cancel single-frame erasure:
Select “NO” and press the
OK/menu button.
Once erased, images cannot be
restored. Check each image before
erasing to avoid accidentally
erasing images you want to keep.
restored. Check each image before
erasing to avoid accidentally
erasing images you want to keep.
3
YES
OFF
NO
Press until the
monitor turns on.