Olympus e-p1 ユーザーガイド
137
EN
Inf
o
o
rm
a
a
tio
n
13
If the optimum exposure cannot be obtained when pressing the shutter button halfway, the
display will blink on the LCD monitor.
display will blink on the LCD monitor.
* The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
Exposure warning display
Shooting
mode
Warning display
example (blinking)
Status
Action
P
The subject is too dark.
• Increase the ISO sensitivity.
• Use the flash.
• Use the flash.
The subject is too bright.
• Decrease the ISO sensitivity.
• Use a commercially available ND
• Use a commercially available ND
filter (for adjusting the amount of
light).
light).
A
The subject is
underexposured.
underexposured.
• Decrease the aperture value.
• Increase the ISO sensitivity.
• Increase the ISO sensitivity.
The subject is
overexposured.
overexposured.
• Increase the aperture value.
• Decrease the ISO sensitivity or
• Decrease the ISO sensitivity or
use a commercially available ND
filter (for adjusting the amount of
light).
filter (for adjusting the amount of
light).
S
The subject is
underexposured.
underexposured.
• Set the shutter speed slower.
• Increase the ISO sensitivity.
• Increase the ISO sensitivity.
The subject is
overexposured.
overexposured.
• Set the shutter speed faster.
• Decrease the ISO sensitivity or
• Decrease the ISO sensitivity or
use a commercially available ND
filter (for adjusting the amount of
light).
filter (for adjusting the amount of
light).
60" F2.8
60" F2.8
4000" F22
4000" F22
30" F5.6
30" F5.6
4000 F5.6
4000 F5.6
4000" F2.8
4000" F2.8
4000" F22
4000" F22
s0019_e_00_0_unified.book Page 137 Friday, April 24, 2009 9:21 AM