Olympus e-p1 ユーザーガイド

59

EN

Select the AF target mode or select the AF target to use with Single target AF mode.

Using [AF AREA] select M to enable selection of the AF target mode and 
position.

j Press the shutter button halfway and release it, then use 

the arrow pad to change the position of the AF target. 

g“n FUNCTION” (P. 102)

You can register a frequently used AF target mode and the position of that AF target. You can 
then quickly load that registered setting (“home position”) and use it when shooting.

gP. 59), press 

< button and F button at the same time.

• The home position is registered at the time the 

buttons are pressed.

• The home position cannot be registered when 

operated from a menu.

To use this function, you must assign the [

PHOME] function to the < button in advance. 

g“; FUNCTION” (P. 100)

< button. 

• The registered home position is selected. Press this button again to switch to the original AF 

target mode.

Set to B.

Indicates that the AF target is 
being registered.

s0019_e_00_0_unified.book  Page 59  Friday, April 24, 2009  9:21 AM