Olympus 1010 クイック設定ガイド

Menu op

erati

ons

• Even when [FACE DETECT] is set, faces may not be detected depending on the subject.

When activated [ON], the camera will record about 4 seconds of
audio after the picture is taken.
When recording, aim the camera microphone at the source of
the sound you want to record.

Select to ON/OFF the image stabilization function.
The default settings for [IMAGE STABILIZER] (still picture) and [DIS MOVIE MODE] (movie)
are set to [ON] and [OFF] respectively.
• When taking pictures with the camera stabilized (using a tripod), set to [OFF].
• Images may be blurry if the camera is severely shaken.
• At very slow shutter speeds (for example when using still picture shooting mode or taking

night photographs), some images may not acquire the proper stabilization effect.

• When [DIS MOVIE MODE] (movie) is set to [ON] during shooting, the recorded images will

be slightly magnified.

This function allows you to turn off operational sounds that occur during shooting and
playback, warning beeps, shutter sounds, etc.

ESP/n .......................

Changing the area for measuring the brightness of a subject

ESP

Meters the brightness at the center of the monitor and the surrounding area
separately to capture an image with balanced brightness. When taking
pictures against strong backlight, the center of the picture may appear dark.

Only the center of the monitor is metered. Recommended for taking a picture
against strong backlight.

AF MODE...................................................................

Changing the focusing area

FACE
DETECT

The camera searches a face within the frame and focus on it.

iESP

The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.

SPOT

Focus selection is based on the subject within the AF target mark.

R .........................................................................

Recording sound with still pictures

OFF / ON