Furuno gp-80 サービスマニュアル
GPS NAVIGATOR GP-80
Operator's Guide
The purpose of this operator's guide is to provide the basic operating procedures for this equip-
ment. For detailed information, refer to the operator's manual.
ment. For detailed information, refer to the operator's manual.
Selecting Display Mode
Press [DISPLAY SEL].
Plotter 1/Plotter 2
Highway
Navigation
Data
Enlarging/Shrinking the
Display
Display
Enlarging: Press [ZOOM IN].
Shrinking: Press [ZOOM OUT].
Shrinking: Press [ZOOM OUT].
Shifting the Cursor
1) Press [CURSOR ON/OFF] to turn on the
cursor.
2) Operate the cursor keys to shift the cursor.
Shifting the Display
1) Press [CURSOR ON/OFF] to turn off the
cursor.
2) Operate the cursor keys to shift the display.
Centering Cursor Position
1) Press [CURSOR ON/OFF] to turn on the
cursor.
2) Operate the cursor keys to position the cur-
sor where desired.
3) Press [CENTER].
Entering/Erasing Marks
1) Press [CURSOR ON/OFF] to turn on the
cursor.
2) Operate the cursor keys to position the cur-
sor where desired.
3) Press [MARK].
To erase any mark (except MOB), place the
cursor on the mark and press [CLEAR].
cursor on the mark and press [CLEAR].
234°
DGPS 3D
34° 23.456´ N 135° 45.678´ E
BRG
345°
BRG To +
11.5
RNG To +
nm
123°
CSE
001
30
40
20
50
H
2nm
234°
DGPS 3D
34° 23.456´ N 135° 45.678´ E
BRG
345°
RNG
123
12.3
SPD
nm
kt
CSE
001
H
002
1.0
1.0
nm
E
3D
N
S
12.3
DGPS 3D
SPD
10.3
123
RNG
789
TRIP
nm
kt
VTD
kt
nm
BRG
23:45'
17H 45M
TO;
012
0.1nm
0.1nm
15
63°
123°
CSE
ETA
TTG
Graphic display
of steering data
of steering data
3D view of ship's
track overlaid on
intended course
track overlaid on
intended course
Ship's track and
data
data
Comprehensive
navigation data
display
navigation data
display
SEP 12, 1995 23:59'59" U
DGPS 3D
12° 23.456' N
123° 23.456' E
123° 23.456' E
POSITION
RNG
31.23
nm
SPD
12.3
kt
BRG
223.4°
CSE
123.4°
TO : 001
MARINE
POINT1
POINT1
NEXT
: 002
MARINE
POINT2
POINT2
Does not appear
on Plotter 2 display.
on Plotter 2 display.