Bunn ICB-TWIN 操作ガイド

Page 27

This function allows adjustment of the amount of water 
that bypasses the grounds. The number signifi es the 
percentage of the brew volume which does not fl ow 
over the coffee grounds.

NOTE: If the brewer is already on the %BYPASS: 
screen, skip steps 1 through 6, and proceed directly 
to step 7.

1.  Press and hold the right hidden button until the dis-

play reads SET LANGUAGE. Press the right hidden 
button until the display reads REVIEW RECIPES.

2. Press 

YES to proceed. The display should now read 

NO-NAME COFFEE, along with MODIFY SHOW 
NEXT.

3. Press 

and 

release 

NEXT to advance to the desired 

recipe to be modifi ed.

4.  Press and release MODIFY. The display should read 

5. Press 

and 

release 

DONE. The display should read 

6. Press and release YES. The display should now 

read %BYPASS: and a batch light will be blinking.  
Press and release the batch size to be modifi ed.

7. Using 

(-) and (+), set the amount of bypass water 

(percentage) to be dispensed around the gounds.

8. When 

fi nished, press the other batch size and repeat 

step # 7.

9.  When fi nished setting both batch sizes, press and 

release DONE. The display should read 2 BATCHES 
DONE?

10.  If both batch sizes are not correct, press and release 

NO to return to the %BYPASS: setup screen and 
repeat steps 7, 8 and 9.

11. If both batch sizes are correct, press YES. This 

will advance to the SET PULSE BREW function. To 
exit to the MAIN SCREEN, press and release either 
ON/OFF button.

PRESSING NO WILL 

ADVANCE TO NEXT 

FUNCTION SCREEN

ADVANCE TO THE 

RECIPE TO BE 

MODIFIED

SET BOTH

BATCH SIZES

IF NO, RETURN TO 

% BYPASS

SET BREW OZ XX.X

WHEN BOTH BATCHES ARE DONE,

PRESS YES TO ADVANCE TO

% BYPASS

38112.1 042105