ConnectGear gr-104 v3.0 ユーザーガイド
2.1.2 Password Settings
You can change the password required to log into the broadband router's system web-based
management. By default, there is no password. So please assign a password to the Administrator
as soon as possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeric
characters, and are case sensitive.
management. By default, there is no password. So please assign a password to the Administrator
as soon as possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeric
characters, and are case sensitive.
Parameters
Description
Current Password
Enter your current password for the remote management
administrator to login to your Broadband router.
administrator to login to your Broadband router.
Note: By default there is NO password
New Password
Enter your new password
Confirmed Password
Enter your new password again for verification purposes
Note: If you forget your password, you’ll have to reset the router
to the factory default (No password) with the reset button (see
router’s back panel)
to the factory default (No password) with the reset button (see
router’s back panel)
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
29