ConnectGear gr-104 v3.0 ユーザーガイド

3) Once you have configured your PCs to obtain an IP address automatically, the router’s

DHCP server will automatically give your LAN clients an IP address. By default the
Broadband Router’s DHCP server is enabled so that you can obtain an IP address
automatically. To see if you have obtained an IP address, see Appendix A.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server
available on your LAN. If there is another DHCP on your network, then you’ll need to switch
one of the DHCP servers off. (To disable the Broadband router’s DHCP server see chapter 2
LAN Port)

4) Once your PC has obtained an IP address from your router, enter the default IP address

192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

5) The login screen below will appear. Enter the “User Name” and “Password” and then click

<OK> to login.

Note: By default the user name is “admin” and the password is “1234”. For security
reasons it is recommended that you change the password as soon as possible (in
General setup/system/password, see chapter 2)

6) The

HOME page screen below will appear. The Home Page is divided into four sections,

Quick Setup Wizard, General Setup, Status Information and Tools.

Quick Setup Wizard (Chapter 1)
If you only want to start using the broadband router as an Internet Access device then you
ONLY need to configure the screens in the Quick Setup Wizard section.

General Setup (Chapter 2)
If you want to use more advanced features that the broadband router has to offer, then you’ll
need to configure the Quick Setup Wizard and the General Setup section. Alternatively, you