Rio sp100 ユーザーズマニュアル

ページ / 1
Play Disc
1. Press the PLAY/PAUSE        button to turn on the player and begin playback.
Note: There will be a short delay while the player loads your music tracks and 
track information.
2. Press the STOP      button to stop playback. Press and hold STOP      to turn 
off the player.
DC IN JACK:
Connects to 
AC adapter
P/N 41000693-001
LOCK/UNLOCK:
Disables or 
enables player 
buttons to 
prevent 
accidental
operation
LINE OUT:
Connects to
included car kit
 or to external
 audio system
MULTIFUNCTION 
Port: Connects 
to headphones 
or remote control
OPEN:
Opens the
player cover
Quick Start
2 Rechargeable
NiMH Batteries
Headphones
RioVolt Player
Welcome to the RioVolt SP350, your complete portable solution for audio CD 
and MP3/WMA CD playback. The SP350 includes Electronic Shock Protection 
(ESP), which buffers up to 32 minutes of digital audio to help prevent 
skipping. Follow these steps to get started:
Unpack
Make sure your package includes the following:
Charge Batteries
1. Press the OPEN button to release the latch and open the player.
2. Remove the battery compartment cover inside the player.
3. Insert the two supplied 1400mAH rectangular NiMH rechargeable batteries. 
Ensure the batteries are inserted properly by matching the + and - on each 
battery with the symbols on the player.
4. Replace the battery compartment cover. Close the player.
5. Connect the supplied AC adapter into the DC IN JACK on the side of the 
player. Let the batteries charge for at least five hours before using the player.
6. When the batteries are charged, unplug the AC adapter and disconnect it from 
the player.
Note: Do not play CDs with the RioVolt while the batteries are charging.
Connect Headphones
Connect the supplied headphones to the MULTIFUNCTION port       on the side of 
the player. If you are using the remote control, plug the headphones into the 
remote control, and plug the remote control into the MULTIFUNCTION port on the 
side of the player.
Tip: You can also use the LINE OUT jack to connect the player to the included Car 
Kit accessories or to an external audio system.
Insert Disc
Your RioVolt supports the following music formats:
• MP3 digital music files
• WMA digital music files
• Standard music CDs (Red Book)
1. Press and slide the OPEN button to release the latch and open the player.
2. Insert an audio CD or MP3/WMA CD into the player, label side up.
3. Close the player.
Tip: The RioVolt SP350 can play CDs with the following logos:
For detailed instructions and 
descriptions please see the 
User’s Guide located on 
the software CDs and at
www.sonicblue.com/support
   
2002 SONICblue Incorporated. All Rights Reserved.
Customer Care
Web site
www.sonicblue.com/support
E-mail
customersupport@sonicblue.com
Technical Support Telephone 
Call for answers to technical questions about your product.
(503) 453-1640
Customer Service Telephone
Call for sales and general product information.
(800) 468-5846
Hours
Please check the support Web site for the current hours of operation.
Battery compartment
cover (inside player):
Remove and insert
the 2 rechargeable
batteries here
AC Adapter
PC/Mac 
Software CDs
Remote
Control
Use the software included on the CDs to encode your audio CDs 
into MP3/WMA formats, organize your digital audio collection, 
or burn a custom CD. Please refer to the software online help 
within each application for instructions on using the software.
+10 and -10:
Press to skip forward 
or backward 10 tracks;
Press and hold to skip 
forward to the next 
directory or backward 
to the previous directory
MODE/CD-FM:
Press to set
repeat/shuffle;
Press and hold to
toggle between
FM mode and
CD mode
VOLUME + and -
Press to adjust
volume level
Accessories
for your RioVolt can be found
online at store.sonicblue.com
Case
Case
Car Kit: Cassette and 
Power Adapters
SONICblue Incorporated shall not be liable for any errors contained herein or for any damages arising out of or related 
to this document or the information contained herein, even if SONICblue has been advised of the possibility of such 
damages. This document is intended for informational and instructional purposes only. SONICblue reserves the right 
to make changes in the specifications and other information contained in this document without prior notification. 
SONICblue disclaims any obligation to update the information contained herein. Rio® is a registered trademark of 
SONICblue Incorporated. SONICblue and RioVolt are trademarks of SONICblue Incorporated. Microsoft, Windows 
Media, and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation in the United States 
and/or other countries. All other brand or product names may be trademarks of the companies with which they are 
associated. Printed in China.