Avaya a500 ユーザーガイド
admin Commands
Cajun A500 ATM Switch User Guide
6-15
admin link_type
Purpose
The
admin link_type
command modifies the type of service provided for an ATM link.
Syntax
admin link_type {
port
} {vpi} {config} [cell rate] [ILMI enable] [max
vci]
Arguments
This command requires the following argument(s):
U If
config
is "no protocols", you do not have to enter a cell rate or ILMI parameter.
If config is "auto" or any of the "IISP" options or "PVC", the user does not have to
enter the ILMI parameter.
U PVCs can be set up on any of the configuration types, except "no protocols".
U The minimum cell rate that you can allocate for a link is 35320 cells per second.
This is 10% of OC3 line rate.
port
Enter the number of the port for which you want to specify service:
A1.1 through A4.8.
vpi
Enter the VPI. Valid values are 0 through 255.
config
Enter the type of service you want provided to this port. Valid values:
1 -> no protocols running
2 -> auto-configuration
3 -> uni3.0 network
4 -> uni3.1 network
5 -> uni4.0 network
6 -> pnni
7 -> iisp3.0 network
8 -> iisp3.0 user
9 -> iisp3.1 network
10 -> iisp3.1 user
11 -> pvcs
1 -> no protocols running
2 -> auto-configuration
3 -> uni3.0 network
4 -> uni3.1 network
5 -> uni4.0 network
6 -> pnni
7 -> iisp3.0 network
8 -> iisp3.0 user
9 -> iisp3.1 network
10 -> iisp3.1 user
11 -> pvcs
cell rate
Enter the cell rate that is allocated to this link.
ILMI enable
Enable or disable ILMI.
max vci
Enter the maximum number of VCIs to be used by this link.