Avaya 9630 ユーザーガイド

ページ / 76
Battery Charger Features
Issue 1   May 1999
2-3
Color of the battery charger’s LEDs indicates the state of the corresponding 
battery pack, as shown in the following table:
NOTE:
Before you use the 9630 Series WT for the first time, the battery pack must 
be charged. New batteries sometimes take up to three charge/refresh cycles 
to reach their maximum performance. Refer to the “Extending Battery Life” 
section for details.
* If steady orange for more than eight hours, replace the battery.
Extending Battery Life
The battery charger charges a battery pack in the WT if you simply insert the WT 
into the battery charger’s WT cradle; however, the refresh process fully 
discharges the battery pack before recharging it, thereby ensuring the best 
possible charge and the longest talk time.
Table 2-1.
LED Indicators
Battery charger 
LED shows... 
If, for the SPARE LED, 
the battery pack in the 
spare battery
compartment... 
If, for the HANDSET 
LED, the battery pack 
in the WT...
If, for the 
REFRESH LED, 
the Refresh 
button was 
pressed, and the 
WT battery pack...
Steady orange*
Is charging
Is charging
N/A
Steady green
Has completed a fast 
charge
Has completed a fast 
charge
N/A
Flashing green 
(see the 
troubleshooting 
section l
ater in 
this chapter)
Temperature is slightly 
outside of the normal 
changing temperature 
range, or voltage is too 
low in battery pack
Temperature is out of 
range, or voltage is 
too low in battery pack
N/A
Flashing red 
(see the 
troubleshooting 
section l
ater in 
this chapter)
Has one of the 
following problems:
--- Is not seated 
properly in the charger
--- Has dirty contacts
--- Temperature 
exceeds normal 
changing temperature 
range
--- Is defective
Has one of the 
following problems:
--- Is not seated 
properly in the charger
--- Has dirty contacts
--- Temperature 
exceeds normal 
changing temperature 
range
--- Is defective
N/A
Steady red
Is discharging
Is discharging
Is discharging