Avaya 6211 ユーザーガイド
DEFINITY
Communications System
Chapter 5: Call Control Operation
DEFINITY High Speed Link
User´s Guide
Page 5-3
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
ANSWERING A CALL
INCOMING CALL
and the green
DATA
LED
flashes), the call can be answered manually from the front panel or
automatically, depending on the configuration of the answer
option.
automatically, depending on the configuration of the answer
option.
Notes:
The DTR lead on the V.35 interface must be ON or the
DTR LEAD option must be set to IGNORE before you
can answer a call.
Calls cannot be answered while the HSL is in local
loopback test mode.
DTR LEAD option must be set to IGNORE before you
can answer a call.
Calls cannot be answered while the HSL is in local
loopback test mode.
ffffffffffffffffffffffffffffffffffffffffffff
Front Panel
When you set the ANSWER option to MANUAL, the automatic
answering feature is disabled, and all incoming calls must be
manually answered via the front panel.
answering feature is disabled, and all incoming calls must be
manually answered via the front panel.
Procedure: Answering a call from the front panel
1
NEXT/NO
until the HSL
displays
CALL CONTROL?
2
Press
ENTER/YES
. If there is an incoming call, the HSL
displays
ANSWER CALL?
3
Press
ENTER/YES
. The HSL answers the call and displays
ffffffffffffffffffffffffffffffffffffffffffff
Auto Answer
When you set the ANSWER option to AUTO (default setting), the
automatic answering feature is enabled and the HSL
automatically answers an incoming call.
automatic answering feature is enabled and the HSL
automatically answers an incoming call.