Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Epson
  4. DFX-9000
  5. ユーザーズマニュアル

Epson DFX-9000 ユーザーズマニュアル

ダウンロード
ページ / 28
Using SelecType Mode 19
English
*1 This setting is available only in IBM PPDS emulation mode.
*2 This setting is available only when the optional perforation cutter (#C81570X) is installed.
*3 These settings are available only when the optional Print Server is installed.
*4 This setting is available only when the optional Print Server is installed and the Get IP address setting is 
set to Panel or PING.
*5 This menu appears when you press the Menu buttons (Tear Off and Top of Form) in SelecType mode.
Follow these steps to enter SelecType mode and change the settings:
1.
Make sure paper is loaded and the printer is on.
2.
Press the 
Menu
 buttons (
Tear Off
 and 
Top of Form
) to enter the SelecType 
mode. The LCD displays the currently selected language.
3.
If you want a different language, press the 
Set
U
 (
Tear Off
) or 
Set
D
 
(
Top of Form
) button until you see the language you want.
4.
Press the 
Item
D
 (
Pitch
) button to set the desired language.
5.
You see 
Print Settings
 on the LCD. Press the 
Set
D
 (
Top of Form
) button to 
print the current settings.
6.
Press the 
ItemU
 (
Font
) or 
Item
D
 (
Pitch
) button to select the setting you 
want to change.
Note:
You can scroll the menu settings by holding down the 
Item
U
 (
Font
) or 
Item
D
 
(
Pitch
) button for a few seconds.
7.
Press the 
Set
U
 (
Tear Off
) or 
Set
D
 (
Top of Form
) button to scroll through 
the options available for the current setting until you see the one you want. 
Note:
You can scroll the options by holding down the
 Set
U
 (
Tear Off
) or 
Set
D
 
(
Top of Form
) button for a few seconds.
8.
When you finish making settings, press and hold down the 
Menu
 buttons 
(
Tear Off
 and 
Top of Form
). The LCD displays
 
Save Setting
. 
Software
ESC/P,
®
 IBM PPDS
0 slash
Off, On
I/F (Interface) mode
Auto, Parallel, Serial, USB, Optional
Auto I/F (Interface) wait time
10 seconds, 30 seconds
Parallel I/F bi-directional mode
Off, On
Packet mode
Auto, Off
Serial baud rate
19200 BPS, 9600 BPS, 4800 BPS, 2400 BPS, 
1200 BPS, 600 BPS, 300 BPS
Serial parity
None, Odd, Even, Ignore
Serial data length
8-bit, 7-bit
Character table
Standard version: PC437, PC850, PC860, PC863, 
PC865, PC861, BRASCII, Abicomp, Roman8, ISO 
Latin 1, PC858, ISO 8859-15, Italic U.S.A., Italic 
France, Italic Germany, Italic U.K., Italic Denmark 1, 
Italic Sweden, Italic Italy, Italic Spain 1
NLSP version: PC437, PC850, PC860, PC863, PC865, 
PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, 
PC858, ISO 8859-15, PC437 Greek, PC853, PC855, 
PC852, PC857, PC866, PC869, MAZOWIA, Code 
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, 
Estonia, ISO 8859-2, PC866 LAT., PC866 UKR, PC 
APTEC, PC708, PC720, PCAR864, PC771, PC437 
Slovenia, PC MC, PC1250, PC1251, Italic U.S.A., 
Italic France, Italic Germany, Italic U.K., Italic 
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
Auto CR (IBM PPDS)
*1
Off, On
IBM character table (IBM 
PPDS)
*1
Table 2, Table 1
Buzzer
Off, On
Low-noise mode
Off, On
Auto cut mode
*2
Off, On
Auto cut/back mode
*2
Off, On
Overlapping multipart forms
Off, On
Continuous forms with labels
Off, On
Skip over binding
Off, On
Get IP address
*3
Panel, Auto, PING
IP address
*4
000.000.000.000 to 255.255.255.255
Setting
Options (default in bold)
Subnet mask
*3
000.000.000.000 to 255.255.255.255
Default gateway
*3
000.000.000.000 to 255.255.255.255
Save settings?
*5
Yes, No
Setting
Options (default in bold)