Epson C44 仕様ガイド

EPSON Stylus C44 Series

8 -

 EPSON Stylus C44 Series

4/03

3. Follow the instructions on the screen to print a test page. 

You see the alignment window.

4. On the printed page, select the pattern that shows the two 

vertical lines most precisely printed on top of each other. 
You may need to use a magnifying glass.

5. Select one pattern each for rows 1, 2, and 3. Then enter 

the number of the best pattern for each row in the 
corresponding boxes on the screen.

6. If you find a perfectly aligned pattern for each row, click 

Finish

. 

If you can’t find a row that has a perfectly aligned pattern, 
select the best pattern and click 

Realignment

 to print 

another test page. Then repeat this step until all three rows 
have a perfectly aligned pattern.

To keep your printer working at its best, you should clean it 
several times a year. Follow these steps: 

1. Turn off the printer, unplug the power cord, and 

disconnect the USB cable.

2. Remove all paper, then use a soft brush to clean any dust or 

dirt from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth. 

Caution: Don’t touch the gears inside the printer.

Never use a hard or abrasive brush, or alcohol or thinner for 
cleaning; they can damage the printer components and case.

Don’t get water on the printer components and don’t spray 
lubricants or oils inside the printer.

Don’t remove the grease on the carriage rail. It is needed to 
lubricate movement of the print head.

Don’t use any cleaning sheets included with special paper; 
they may jam inside the printer.

If you move your printer some distance, you need to prepare it 
for transportation in its original box or one of a similar size.

Caution: To avoid damage, always leave the ink cartridges 
installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing the 
printer in its new location.

Follow these steps:

1. Turn on the printer, wait until the print head locks in the 

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then 

disconnect both the power cord and the printer cable from 
the printer.

3. Remove any paper from the printer and remove the paper 

support.

4. Open the printer cover. Secure the ink cartridge holder to 

the printer with tape as shown, then close the printer cover.

5. Push in the output tray.

6. Repack the printer and its attachments in the original box 

using the protective materials that came with them. 

Keep the printer level as you transport it. 

After transporting the printer, remove the tape securing the 
print head and test your printer. If you notice a decline in 
print quality, clean the print head (see page 7); if output is 
misaligned, align the print head (see page 7). 

PL-SC44UX

EPSON Stylus C44 Series Parts Price List

CPD-15884

EPSON Stylus C44 Series Start Here

CPD-15885

EPSON Stylus C44 Series Installing 
Software/Important Notices booklet

CPD-15883

EPSON Stylus C44 Series CD-ROM with 
User’s Guide in HTML format

Tape the ink 
cartridge holder to 
the printer case