Epson 777 ユーザーズマニュアル

■

The print head nozzles may need 
cleaning; see page 19 for instructions.

■

The ink cartridges may be old or low 
on ink. To replace an ink cartridge, 
see page 21. 

■

Make sure the 

Media Type

 setting 

matches the paper you loaded. See 
page 17 for guidelines.

■

Make sure your paper isn’t damaged, 
old, dirty, or loaded face down. If it 
is, reload a new stack of paper with 
the printable side up; it is usually 
whiter or shinier than the other side.

■

Try using a higher quality paper.

■

Set the Quality/Speed slider to 

Quality

; see page 7 (Windows) or 

page 11 (Macintosh) for details.

■

Run the Print Head Alignment 
utility. See page 24 for instructions.

■

You may need to increase the image 
resolution or print it in a smaller size; 
see your software documentation.

■

Make sure the Ink setting is set to 

Color

 for color images and your 

application is set for color printing.

■

The print head nozzles may need 
cleaning; see page 19 for instructions.

■

The ink cartridges may be old or low 
on ink. To replace an ink cartridge, 
see page 21. 

■

If you’re printing a high-resolution 
image, turn off PhotoEnhance, as 
described on page 13. Also check if 
you’re using a special effect that alters 
image colors, such as Sepia.

■

Try using Automatic mode. See 
page 7 (Windows) or page 11 
(Macintosh) for instructions.

■

Your printed colors can never 
exactly match your on-screen colors. 
However, you can use a color 
management system to get as close as 
possible. For information, see your 
electronic Reference Guide (as 
described on page 2).