Epson 1400 参照マニュアル
Epson Stylus Photo 1400
1/07
Epson Stylus Photo 1400
- 9
Using Your Computer to Check the Print
Head Nozzles
Head Nozzles
1. Make sure the printer is turned on but not printing, and the
red
H
ink light is not on. (If the red
H
ink light is on, you
need to replace a cartridge.)
2. Make sure letter-size plain paper is loaded in the printer.
3. Windows: Right-click the
printer icon on your taskbar
(in the lower right corner of your screen). Select
Nozzle
Check
.
Macintosh: Open the
Applications
folder and select
EPSON Printer Utility2
. Select
Epson SP 1400 Series
in
the printer list, click
OK
, and select
Nozzle Check
.
You see a screen like the following:
4. Click
Print
. The nozzle check pattern prints. (See the
example on page 8.)
5. If there are no gaps in the patterns, click
Finish
.
If there are gaps or lines, or the test patterns are faint, click
Clean
and follow the on-screen instructions to clean the
print head.
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or you notice
light or dark bands across your printout, you may need to
clean the print head. This unclogs the nozzles so they can
deliver ink properly. Print head cleaning uses ink, so clean it
only if quality declines.
light or dark bands across your printout, you may need to
clean the print head. This unclogs the nozzles so they can
deliver ink properly. Print head cleaning uses ink, so clean it
only if quality declines.
You can clean the print head using the buttons on the control
panel or using the computer.
panel or using the computer.
Before you clean the print head, make sure the CD/DVD tray
is not inserted in the printer.
is not inserted in the printer.
Caution: If you don’t use your printer often it is a good idea to print
a few pages at least once a month to maintain good print quality.
a few pages at least once a month to maintain good print quality.
Using the Printer Buttons to Clean the
Print Head
Print Head
1. Make sure the printer is turned on but not printing, and the
red
H
ink light is off. (If the red
H
ink light is flashing or
on, you need to replace a cartridge.)
2. Hold down the
H
ink button for 3 seconds.
The printer cleans the print head and the green P power
light flashes. Cleaning takes about two minutes.
light flashes. Cleaning takes about two minutes.
Caution: Never turn off the printer while head cleaning is in
progress. You may damage it.
progress. You may damage it.
3. When the green P power light stops flashing, make sure
paper is loaded in the printer, then print a nozzle check to
determine whether you need to clean the print head again.
See page 8 for more information.
determine whether you need to clean the print head again.
See page 8 for more information.
If you don’t see any improvement after cleaning four times,
turn the printer off and wait at least 6 hours. This allows
any dried ink to soften. Then clean the print head again.
turn the printer off and wait at least 6 hours. This allows
any dried ink to soften. Then clean the print head again.
Using Your Computer to Clean the Print
Head
Head
1. Make sure the printer is turned on but not printing, and the
red
H
ink light is off. (If the red
H
ink light is flashing or
on, you need to replace a cartridge.)
2. Windows: Right-click the
printer icon on your taskbar
and select
Head Cleaning
.
Macintosh: Open the
Applications
folder and select
EPSON Printer Utility2
. Select
Epson SP 1400 Series
in
the printer list, click
OK
, and select
Head Cleaning
.
You see a screen like the following:
3. Click
Start
or
Next
.
The printer cleans the print head and the green P power
light flashes. Cleaning takes about two minutes.
light flashes. Cleaning takes about two minutes.
Caution: Never turn off the printer while head cleaning is in
progress. You may damage it.
progress. You may damage it.