Epson R220 ユーザーガイド

Problems and Solutions

■

Make sure the paper support extension is pulled up. 

■

If paper doesn’t feed, remove it from the sheet feeder, reload it against the right 
edge, then slide the left edge guide against the paper.

■

If multiple pages feed at once, remove the paper from the sheet feeder, fan the 
edges to separate the sheets, and carefully reload it.

■

If paper jams, press the ) paper button to clear the jam. If that doesn’t resolve 
the paper jam, open the cover and remove any jammed paper, including small 
pieces that may have torn off. Reload the paper and press the ) paper button.

If your paper loads incorrectly or jams frequently:

■

Use new, smooth, high-quality paper, loaded printable side up. Don’t load 
paper above the arrow mark on the left edge guide.

■

Place the paper against the right edge and slide the left edge guide against it, 
but not too tight.

■

Store paper flat to prevent curling.

Adjust the Print position as described on page 28.

■

Make sure you’re using ink jet-printable CDs or DVDs.

■

Handle the disc carefully and allow the ink to dry for at least 24 hours before 
playing the disc or inserting it in a drive.

■

Adjust the print density as described on page 29.

■

Adjust the brightness or contrast. See the EPSON Print CD on-screen Help.

Clean the rollers as described on page 22.

R220.book  Page 51  Sunday, August 7, 2005  3:41 PM