Epson 5300 ユーザーズマニュアル

Connecting to a Computer

49

The PowerLite 7200 and 7300 are capable of remapping input 
resolutions up to 1280

×

1024 pixels. Since 1280

×

1024 pixels is the 

default resolution for most leading workstations, this capability makes 
these projectors the best portable solution for the display of 
workstation video output.

There is no standard for workstation video output. Those workstations 
that follow the SXGA standard and use the HD15 connector don’t 
need an adapter cable. The most popular workstations use a 13-pin 
13W3 connector, which requires an adapter cable (ELPKC06).

In addition, workstations pass the sync (synchronization) signal 
differently, so the ELPKC06 adapter cable has a DIP switch to control 
sync routing. Contact your audio/video dealer for information on 
connecting your workstation.

You can connect a VCR, a camcorder, a laser disc player, DVD player, 
or any other compatible video image source to your projector.

The projector can receive composite video, S-Video, or component 
video. Your equipment has composite video if your video source has a 
one-pin RCA video jack. Your equipment has S-Video if your video 
source has a four-pin (mini-DIN) video jack. Your equipment has 
component video if your video source has a three-connector (Y, R-Y, 
B-Y) video jack.

5300.book  Page 49  Tuesday, April 13, 1999  4:19 PM