Epson 5300 ユーザーズマニュアル
1 • Setting Up the Projector
54
Note: EPSON offers the Mediaphile PAS (personal audio system) for
external amplification. See page page 4 for the part number and
ordering information.
external amplification. See page page 4 for the part number and
ordering information.
3. Connect the RCA plugs to the external amplified speaker or PA
system. Insert the cable’s red plug into the Audio R jack, and the
white plug into the Audio L jack.
white plug into the Audio L jack.
Note: The internal speakers are disabled when an external audio
system is used.
system is used.
Turning the Equipment On and Off
It’s best to turn on the projector and its attached equipment in the
following order:
following order:
1. Video source (such as a VCR), if your video source is not your
computer
2. Audio source (if different from computer or video source)
3. Computer
4. External amplified speaker or PA system (if necessary)
5. Projector
When you are ready to turn off the equipment, turn them off in the
reverse order.
reverse order.
5300.book Page 54 Tuesday, April 13, 1999 4:19 PM