Epson 5300 ユーザーズマニュアル
Sleep Mode
65
Resize Button
The Resize button lets you select the projection method for certain
types of image signals input from a computer.
types of image signals input from a computer.
With images below SVGA size (800
×
600 pixels) on the PowerLite
5300, or below XGA size (1024
×
768 pixels) on the PowerLite 7200
or PowerLite 7300, you can choose from two projection methods.
Either display the image in the center of the projection area or display
the image full size.
Either display the image in the center of the projection area or display
the image full size.
You can also choose from two projection methods with images greater
than SVGA size (PowerLite 5300) or XGA size (PowerLite 7200 or
PowerLite 7300). Either project a portion of the image or project the
entire image in a compressed format. The projector automatically
reduces the image size to the projector’s maximum resolution.
than SVGA size (PowerLite 5300) or XGA size (PowerLite 7200 or
PowerLite 7300). Either project a portion of the image or project the
entire image in a compressed format. The projector automatically
reduces the image size to the projector’s maximum resolution.
The Resize button cannot be used with SVGA (800
×
600) on the
PowerLite 5300, or with XGA (1024
×
768) on the PowerLite 7200 or
PowerLite 7300.
There’s a Resize button on both the control panel and remote
control.
control.
Sleep Mode
Sleep mode conserves electricity by automatically turning off the lamp
after the projector has not been used for 30 minutes. In sleep mode,
the projector’s power status indicator is orange and only a minimum
amount of the projector’s circuitry remains on. This conserves
after the projector has not been used for 30 minutes. In sleep mode,
the projector’s power status indicator is orange and only a minimum
amount of the projector’s circuitry remains on. This conserves
5300.book Page 65 Tuesday, April 13, 1999 4:19 PM