Magellan 2000 ユーザーガイド

18

1.

While viewing the Compass screen, press MENU.

2.

Select Set true north direction.

3.

Place the Magellan Triton on a flat surface.  Rotate the Triton 

until the green arrow points to the North (N) symbol on the 
compass.  

4.

Select the green checkmark.

5.

Confirm the completion of the True North calibration by 

selecting the green checkmark.

The Altimeter / Barometer screen displays your current elevation and 
barometer readings.

The Satellite Status Screen graphically displays the satellites and their 
signal strength that is being used to compute your location. This screen 
shows when you are getting strong, weak, or poor signal reception. Green 
satellite icons represent satellites that are being used to compute your 
position while yellow (good), white (medium), and red (poor) icons show 
signal strengths of other available satellites. Signal levels are also 
represented at the bottom of the screen as colored bars.  

The numbers indicate the GPS satellite ID while “W” indicates WAAS 
(Wide Area Augmentation System) satellites.

There are also two customizable navigational screens displayed at the 
bottom of the display.

1.

Select the field you want to change by highlighting the field and pressing ENTER.

2.

Select the data that you want to be displayed.  (You can do this by either tapping on the data 

field or use the cursor control to highlight the data field in orange and press ENTER.)

3.

The Satellite Status screen will be displayed with the field changed to the type selected.