TallyGenicom 930 ユーザーガイド

This printer has been carefully designed to give you years of
safe, reliable performance. As with all electrical equipment,
there are a few basic precautions you should take to avoid
hurting yourself or damaging the printer:

• Read the setup and operating instructions in this manual

carefully. Be sure to save it for future reference.

• Read and follow all warning and instruction labels on the

printer itself.

• Unplug the printer before you clean it. Use only a damp

cloth; do not use liquid or aerosol cleaners.

• Place your printer on a firm, solid surface. If you put in on

something unsteady, it might fall and be damaged; if you
place it on a soft surface, such as a rug, sofa, or bed, the
vents may be blocked, causing it to overheat.

• To protect your printer from overheating, make sure no

openings on the printer are blocked. Do not put the printer
on or near a heat source, such as a radiator or heat
register. If you put the printer in any kind of enclosure,
make sure it is well ventilated.

• The printhead can get quite hot when it has been printing

for a length of time. Do not touch the printhead until it has
had a chance to cool off.

• Do not use your printer near water, or spill liquid of any

kind into it.

• Be certain that your power source matches the rating listed

on the back of the printer. If you are not sure, check with
your dealer or with your local power company.

• Your printer has a grounded, 3-prong plug as a safety

feature, and it will only fit into a grounded outlet. If you
can not plug it in, chances are that you have an older,
non-grounded outlet; contact an electrician to have it
replaced with a grounded outlet. Do not use an adapter to
defeat the grounding.

• The printer must be installed near a power outlet which

will remain easily accessible.

• To avoid damaging the power cord, do not put anything on

it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.

Safety.p65

10/3/97, 9:30 AM

1