TallyGenicom la650 ユーザーガイド
User guide
Installation
8
Checking the printer
voltage
voltage
Make sure that the device has been set to the correct voltage (e.g.
120 V in the USA, 230 V in Europe). To do this, check the type plate
above the power inlet at the back of the printer. Contact your dealer
if the setting is incorrect.
120 V in the USA, 230 V in Europe). To do this, check the type plate
above the power inlet at the back of the printer. Contact your dealer
if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect,
since this may result in severe damage.
since this may result in severe damage.
If the setting is incorrect, set the colored switch at
the rear of the printer to the correct position, using
a pointed object (e.g. screwdriver, ball pen or
tweezers).
the rear of the printer to the correct position, using
a pointed object (e.g. screwdriver, ball pen or
tweezers).
Make sure that the printer is switched
off before setting the correct voltage;
otherwise severe damage may be
caused.
off before setting the correct voltage;
otherwise severe damage may be
caused.
Connecting the printer
Connect the power cable
c
to the power inlet of
the printer. Connect the power cable plug to a
mains socket.
mains socket.
Make sure that the printer and the computer are
switched off and connect the data cable
switched off and connect the data cable
d
be-
tween the printer and the computer.
STOP
120V
STOP
c
d