TallyGenicom la650 ユーザーガイド

The auto tear or the auto view function can be selected as desired.

When auto view is switched on, the last printed text is visible.

When auto tear is switched on, the perforation of the paper is posi-
tioned at the tear off edge of the printer, when no data are pro-
cessed.

Press TearView (3) key.

Use the 

 (2) or 

 (3) key to select the desired setting.

Setting Options: View=1s/3s/6s

Default Setting: Tear=1s

If the parameter View is set to 1s, 3s or 6s, the paper moves to the 
“normal” print position as soon as data is received. After printing the 
printer waits for the given interval to bring the paper once more to 
the auto view position.

If the parameter Tear is set to 1s, 3s or 6s, the perforation of the pa-
per is positioned at the tear off edge of the printer. If data is received, 
the paper returns to the normal print position. After printing, the print-
er waits for the given interval to bring the paper once more to the tear 
off position. If the tear off edge is not aligned with the perforation of 
the paper, this can be corrected (see 

If the parameter No Tear/Reverse is set, TearView mode is disabled 
and no backward movements are performed.

If the parameter Manual is set, the paper can still be brought into a 
View or Tear position via a specific sequence (see 

) or by 

pressing the Tear key.

If the parameter Tear at TOF is set, the paper perforation is auto-
matically positioned at the tear off edge as long as the current print 
position TOF is activated. Feeding takes place after approx. 1.5 sec-
onds (hold time). If any data is received during this period of time the 
paper is not positioned at the tear off edge. With this function it must 
be noted that the printer may only be switched off when the print po-
sition is at TOF.

Confirm the setting by pressing the Set key (1). Press the Next key 
(4) to access the next group of parameters.

Paper

TearView

Online

Setup

2

1

3

4

Back

Next

ViewTear=1s

*

Online

Setup

Set

<

>

Exit

2

1

3

4