GoVideo dvr4500 製品マニュアル
58
DVD+VCR User’s Guide
TROUBLESHOOTING
H E L P
This Chapter provides customer support information, as well as a list of FAQs,
technical specifications, the product warranty and a special feature summary.
The chart below will help you solve common challenges with your DVD+VCR. If
you don’t find the answers you need here, you can contact our Customer Service
Department as follows:
you don’t find the answers you need here, you can contact our Customer Service
Department as follows:
SYMPTOM
SOLUTION(S)
Cannot access Setup menu.
• Stop the DVD player. You cannot access the
Setup menu while a disc is playing.
No sound from speakers.
• Connect the DVD+VCR to a Dolby Digital-ready
amplifier. You cannot connect speakers directly
to the analog audio outputs because the unit
does not have a built-in amplifier.
to the analog audio outputs because the unit
does not have a built-in amplifier.
• Dolby Digital and/or DTS not enabled in the
menu system; see page 39.
TV only shows Go-Video screen.
• Connect the Composite and S-Video outputs to
separate inputs on your television. If your
television has one set of inputs for both S-Video
and Composite, then the S-Video will most
likely override the Composite input.
television has one set of inputs for both S-Video
and Composite, then the S-Video will most
likely override the Composite input.
Cannot play other regional DVDs.
• The DVD-VCR will play Region 1 encoded discs
only.
Cannot record on DVD deck.
• The DVD deck does not allow recording.
Can I connect to surround sound system? • Yes, you can connect the DVD+VCR to an
audio/video receiver or amplifier using the
coaxial or optical digital outputs or analog
outputs.
coaxial or optical digital outputs or analog
outputs.
What types of discs can I play?
• DVD Video, CD Digital Audio, CD Video, SVCD
and CD-ROM with MP3 tracks.
Picture has black bars.
• Make sure your TV Aspect Ratio is set properly
to 4:3 or 16:9; see page 51.
• Aspect ratios vary from disc to disc. The specific
DVD may not offer a 4:3 full-screen version.
Auto Setup did not find all channels.
• If a cable box/satellite receiver is connected,
the DVD+VCR will only find the cable box
output channel. Use the alternative cable box
hookup on page 42.
output channel. Use the alternative cable box
hookup on page 42.
No picture.
• Press TV/VCR until the VCR indicator lights on
the front panel display.
• Set Channel Switch to channel 4.
D
A P P E N D I X
Phone:
(480) 922-0896
Office hours:
Monday-Friday, 6:00 a.m. to 9:00 p.m. MST
Saturday-Sunday, 8:00 a.m. to 4:00 p.m. MST
Saturday-Sunday, 8:00 a.m. to 4:00 p.m. MST
E-Mail:
“customerservice@sensoryscience.com”
Web:
“www.govideo.com” or
“www.sensoryscience.com”
“www.sensoryscience.com”