Lexmark Pro915 ユーザーガイド

25 sheets of labels

You use full label sheets. Partial sheets (with areas exposed by missing
labels) may cause labels to peel off during printing, resulting in a paper
jam.

You load letter

‑ or A4‑size label sheets.

The print side of the labels faces down.

The top of the labels feeds into the printer first.

The paper guides rest against the left, right, and bottom edges of the
label sheets.

50 transparencies

The rough side of the transparencies faces down.

You load letter

‑ or A4‑size transparencies.

You remove any paper backing sheets from the transparencies before
loading.

If the transparencies have a removable strip, then each strip faces
down.

The paper guides rest against the left, right, and bottom edges of the
transparencies.

Note: Transparencies require more drying time. Remove each transparency
as it exits, and allow it to dry to avoid ink smudging.

10 iron-on transfers

You follow the loading instructions that came with the iron-on
transfers.

The print side of the transfers faces down.

The paper guides rest against the edges of the transfers.

Note: For best results, load transfers one at a time.

Loading paper and original documents