TallyGenicom 9035 ユーザーガイド

Feb 05

34PPM Laser Printer User Guide

The Interface Menu provides access to the printer interface settings. Use the following procedure 
to enter the interface menu:

Press the MENU button on the control panel.

Press the NEXT button until the text “Interface Menu” is shown on the second line of the 

display.

Press the SELECT button to enter the interface menu.

Press the NEXT button to move through the submenus: Port, Parallel Setup, Network 1 

Setup, Spooling, and USB Setup.

Use the procedures in the following table to access and change the printer interface settings:

Port
This submenu allows 
you to enable the type 
of interface.

Parallel:
On

Network Card 
1:
On
USB:
On

Parallel:
On, Off

Network Card 
1:
On, Off
USB:
On, Off

 1. Press NEXT or PREVIOUS to toggle 

between PARALLEL, NETWORK 
CARD 1 and USB. 

 2. Press SELECT to save this setting.

Parallel Setup
This submenu allows 
you to set up the 
parallel interface. 

Interpreter:
Auto Switch

Format:
Raw

Mode:
Bidirectional

Delay Out 
Close:
Off
Binary PS:
Off

Interpreter:
Auto Switch
PCL
PostScript 3

Format:
Raw
Normal 
Binary

Mode:
Bidirectional
Standard

Delay Out 
Close:
Off
On
Binary PS:
Off
On

 1. Press NEXT or PREVIOUS to scroll 

through the INTERPRETER, 
FORMAT, MODE, DELAY OUT 
CLOSE, and BINARY PS submenus. 

 2. Press SELECT to choose a submenu. 
 3. Press NEXT or PREVIOUS to scroll 

through the settings. 

 4. Press SELECT to choose and save a 

setting.