TallyGenicom 9035 ユーザーガイド
Feb 05
1-4
34PPM Laser Printer User Guide
Printer Location Requirements
Printer Location Requirements
Printer Location Requirements
Printer Weight and Dimensions
This printer weighs approximately 51 lbs (23 kg) and should always be lifted by two people. The
dimensions of the printer are listed below.
dimensions of the printer are listed below.
■
Printer Height: 15.9 in (404 mm)
■
Printer Width (left to right): 16.6 in (422 mm)
■
Printer Depth (front to back): 18.3 in (465 mm)
Installation Space
Ensure that the printer has enough installation space as shown in the diagrams.
CAUTION: The machine has ventilation holes on the rear and side panels. Ensure that the
machine is installed with a minimum clearance of 255 mm from the rear vent to the wall, 200 mm
from the left vent to the wall, and 300 mm from the right vent to the wall. A poorly ventilated
machine can cause excessive internal heat and fire. The accompanying diagram shows the min-
imum clearances required for normal operation, consumables replacement, and maintenance to
ensure your machine operates at peak performance.
machine is installed with a minimum clearance of 255 mm from the rear vent to the wall, 200 mm
from the left vent to the wall, and 300 mm from the right vent to the wall. A poorly ventilated
machine can cause excessive internal heat and fire. The accompanying diagram shows the min-
imum clearances required for normal operation, consumables replacement, and maintenance to
ensure your machine operates at peak performance.