TallyGenicom 9035 ユーザーガイド

Feb 05

34PPM Laser Printer User Guide
No Power

When problems occur while using the printer, search for the corresponding item from the follow-
ing list of problems to carry out the appropriate action for the problem. 

There is no power.

Is the power switched off?

Press the printer switch to the <I> position to 
turn the power on. 

Is the power cord disconnected or not 
securely connected?

Switch off the power and connect the cord to 
the power outlet and printer again. Then, 
switch on the power.

Is the power cord connected to a power 
outlet with the correct voltage?

Connect the printer exclusively to an outlet 
with a suitable voltage rating and current 
rating. 

Safety Notes

Power is interrupted 
frequently.

Printer may have malfunctioned. 

Switch off the power to the printer, remove 
the plug from the power outlet and contact 
our Printer Support Desk. 

Is the power cord disconnected or not 
securely connected?

Switch off the power and connect the cord to 
the power outlet and printer again. Then, 
switch on the power.

Print instruction was sent but 
processing did not start.

Is the error indicator lit?
Is the error indicator blinking?
Is the print-ready indicator off?

Carry out the action according to 
the status of the indicator.

Is there any message displayed on 
the control panel?

Check the message, then carry out 
the action. 

Is there any message displayed in 
the computer?

Check the message, then carry out 
the action.