Fujifilm 40i クイック設定ガイド

Windows-specific Problems

■ Is the camera switched on?

Solution: Switch the camera on. Refer to the Owner’s Manual supplied with the

camera for details.

■ Is the camera set to USB connection mode?

Solution: Some cameras have to be set to a proper mode (eg. Playback mode) for

USB connection. Refer to the Owner’s Manual supplied with the camera for
details.

■ Is the USB cable connected to the camera and the PC?

Solution: Check that one end of the USB cable is connected to the camera and the

other end to the PC.

■ Are you using a compatible operating system?

Solution: The USB Driver is not supported by Windows 3.1 or earlier, Windows CE,

Windows 95 or Windows NT 4.0 or earlier. Use a compatible operating
system.

■ If you are using Windows 2000 Professional, are you logged on as an

Solution: Log on as an Administrator group.

■ Are the USB functions active?

: Click “System” in the Control Panel, select “Device Manager” and check

“Universal Serial Bus controllers”.

Solution 1: If “Universal Serial Bus controllers” is not displayed, the USB functions is

disabled. Refer to the User’s Manuals supplied with your PC for details of
how to enable the USB functions.

Solution 2: If the driver is marked with a yellow “!” or a red “x”, USB Driver is not

running. Upgrade the USB Driver.

■ (Mac) Is the USB Driver active?

Solution: Select “USB04CB_StorageShim” and “USB04CB_StorageDriver” in the

Extensions Manager and restart your Macintosh.

■ (Win) When opening the Device Manager, there is a yellow “!” mark next to the

Solution: You are using a driver or camera that prevents the driver for the Universal

Serial Bus controllers from operating. Check your PC setup.

■ (Win) When opening the Device Manager, there is a yellow “!” mark next to USB

Solution: You are using a driver or camera that prevents the USB Driver from

operating. Check your PC setup.

■ (Mac) If you are using an iMac, have you updated the iMac?

Solution: It may be necessary to update your iMac. (See P.27.)

■ (Mac) Is the USB Driver software installed?

Solution: Install the USB Driver software on your PC. For instructions on installing

■ Did you rename any files or folders inside the DCIM folder?

Solution: Change the file or folder names in the DCIM folder back to the original

names.

■ Did you replace an image file inside the DCIM folder?

Solution: Do not replace image files in the DCIM folder.