Funai sv310fx1 ユーザーガイド

28

I

NFORMATION



Troubleshooting

Symptom

Remedy

The power will not stay on. 

The device turns off by itself while in 

operation.

• Make sure the battery is fully charged.
• The battery is not charged enough. Charging batteries may take

a while on some PCs. 

Charge the battery until the battery indicator shows full "

".

• If this device is left with no activity for more than 3 minutes, 

it will be turned off automatically (except when the device is

connected to a PC) to prevent the battery drain.

Cannot charge the battery.

• Turn the device off fi rst, then charge the battery.
• We recommend to keep the temperature around the device at 

50°F (10°C) to 86°F (30°C) when charging the battery.

• If you charge the battery through the USB terminal on your PC, 

make sure the PC is active and not in the sleep mode. 

• The battery may not be charged properly when charging 

through a USB hub. Make sure to connect the device directly to

the PC using the supplied USB connector.

Cannot record.

• You cannot record continuously for more than 29 minutes.
• Check the microSD / microSDHC card or internal memory has

suffi cient space.

• Faulty microSD / microSDHC card may be inserted.

Try other microSD / microSDHC card.

• Use the microSD / microSDHC card which is higher than class 2.

Cannot playback.

• Folder / fi le names may have been changed. If name

remembered, rename to the original name. 

• We do not guarantee the playback of the fi les which has been

edited on a PC or the images were recorded with another 

device.

• Faulty microSD / microSDHC card may be inserted.

Try another microSD / microSDHC card.

Picture poor.

• Check if the "Night vision" is off.  With "Night vision", the colors

of the object cannot be reproduced properly.

The distorted picture has been 

recorded (or played back).

• This device is equipped with the CMOS sensor. A characteristic

of a CMOS sensor, fast moving objects may appear distorted

while shooting. This is not a malfunction.

The device doesn't recognize the

microSD / microSDHC  card.

• The card formatted on the personal computer may not be

recognized. When formatting a microSD / microSDHC card, 

make sure to format on this device.

[Firmware update?] is always on the

LCD screen when device is turned

On.

• Remove microSD / microSDHC card from the device. Place

card in SD Adaptor and install it on a PC. Use the PC to erase

the fi rmware update fi le from the microSD / microSDHC card. 

Reinstall the microSD / microSDHC card into the device.